Barbells


We offer barbell bars at any needs needs. Whether its barbells in IWF standard for weightlifting, barbells for crossfit, or a bar for the garage gym, you can get it here.

43 Item(s)

per page

  • Beater Bar XF vægtstang - 15 kg

    Trithon Beater Bar på 15 kg i XF serien. Vægtstangen er beregnet til kvinder, idet den er 201 cm lang, hvor de almindelige herre vægtstænger er 220 cm lange. XF 15 kg vægtstangen er med 25 mm greb, og beregnet til 50 mm vægtskiver. Vægtstangen har sort lakeret greb kan klare en maks belastning på 325 kg. Learn More
    €242.33

  • TR1 Bomber Bar - 20 kg

    Great allround barbell for weightlifting and powerlifting. The bar can handle 1.500 lbs (750 kg) and has dual knurlmarkings placed for both PL and WL. The barbell is black oxide coated for a sharper knurl and has been droptested for 2.000 drops without bending. Learn More
    €363.83

  • Short Beater XF vægtstang - 15 kg

    Trithon Beater Bar på 15 kg i XF serien med 115 imellem kraverne og større kraver med 38 cm loading area på hver side Vægtstangen er beregnet til kvinder, idet den er 201 cm lang, hvor de almindelige herre vægtstænger er 220 cm lange. XF 15 kg vægtstangen er med 25 mm greb, og beregnet til 50 mm vægtskiver. Vægtstangen har sort lakeret greb kan klare en maks belastning på 325 kg. NB: Stangen er kun 115 cm fra krave til krave så det er ikke alle stativer den passer på. Check dit stativ inden du bestiller. Learn More
    €242.33

  • TR2 Elite WL bar - 20 kg

    The TR2 Elite barbell has a medium sharp knurling feel that won't shred the skin of your legs and neck and a center knurl together with WL markings. The grip is 28 mm and the bar is 220 cm long with a weight of 20 kg - perfect for professionel gyms. The bar is made og the highest quality steel with a tensile strength of 216,000 PSI, which means that it takes 216,000 pounds per square inch of pressure to break the bar. In other words - these bars don't bend. The TR2 Elite WL barbell has a great "whip" with good flexibility while still being stiff enough for all sorts of training with barbells. It is ideal for weight lifting and functional training. The bar is fitted with copper bushing that are gel lubricated and maintenance. The bars can be stored in both a horisontal and vertical stand without the lubrication runs out of the sleeves. All the barbells in our TR2 and TR3 series has been tested in a hydraulic machine with a pressure of 1,500 lb after which the bar must return to a straight condition with a maximum deviation of 0.3 mm. The TR2 and TR3 series bar won't bend og break unless they are severely abused. The bars also come in a female version with 25 mm grip and 15 kg weight. Learn More
    €363.83

  • OL Vægtstang holder til gulv - 9 stk

    Solid vægtstangsholder, hvor der kan placeret 9 olympiske vægtstænger i lodret position med i de 50 mm store rør. Vægtstangsholderen passer til alle standard vægtstænger, som dem der benyttes til crossfit, fitness og vægtløftning. Det kraftige opbevaringsstativ kan bruges både til hex bars, curl bars og bænkpres vægtstænger. Den store plade står stabilt på jorden med et lavt tyngdepunkt og sikrer, at vægtstængerne ikke vælter, selvom man kun har enkelte vægtstænger i rørene. Learn More
    €174.83

  • TR2 Elite WL bar - 20 kg

    The TR2 Elite barbell has a medium sharp knurling feel that won't shred the skin of your legs and neck and a center knurl together with WL markings. The grip is 28 mm and the bar is 220 cm long with a weight of 20 kg - perfect for professionel gyms. The bar is made og the highest quality steel with a tensile strength of 216,000 PSI, which means that it takes 216,000 pounds per square inch of pressure to break the bar. In other words - these bars don't bend. The TR2 Elite WL barbell has a great "whip" with good flexibility while still being stiff enough for all sorts of training with barbells. It is ideal for weight lifting and functional training. The bar is fitted with copper bushing that are gel lubricated and maintenance. The bars can be stored in both a horisontal and vertical stand without the lubrication runs out of the sleeves. All the barbells in our TR2 and TR3 series has been tested in a hydraulic machine with a pressure of 1,500 lb after which the bar must return to a straight condition with a maximum deviation of 0.3 mm. The TR2 and TR3 series bar won't bend og break unless they are severely abused. The bars also come in a female version with 25 mm grip and 15 kg weight. Learn More
    €377.33

  • Beater Barbell - 220 cm

    Trithon Beater Bar is a 220 cm barbell for 50 mm weight plates and can be used for bench press and squat. The barbell can be used in small exercise rooms and garage spaces, and is a good basic bar that slides well in the collars when training. The bar is with a chromed surface and has a good grooved surface, where you hold tight and center knurling so it sits well on the neck while doing squat. The bar can withstand being thrown to the ground without breaking or bending and can handle a maximum load of 325 kg. Free shipping Learn More

    Regular Price: €269.33

    Special price €168.75

  • Beater Bar XF barbell - 20 kg

    Trithon Beater Bar XF is a 220 cm barbell for 50 mm weight plates with black lacquer and with standard WL knurl markings so you can place your fingers correctly while exercising and always get the same hand position and grip in the lifting for an ideal workout. The barbell also has center knurling so it can be used for squat training, so it does not slide so easily when you have the barbell on the upper back. The bar can withstand being thrown to the ground without breaking or bending and can handle a maximum load of 325 kg. Free shipping Learn More
    €269.33

  • TR2 Cicero Barbell - 20 kg

    Great barbell in chromeplated alloy steel without centerknurling and with PL and WL ring knurling. This barbell can be used in any combination whether you want to bench press , squat or deadlift . The barbell can handle a maximum load of 750 kg and all have heavy bushings that can withstand the force for being dropped to the ground after lifting without the barbell is bending or breaking. The barbell is suitable for both crossfit and strength training and is drop tested with 2,000 drops without bending Learn More
    €309.83

  • TR2 Elite WL bar - 20 kg

    The TR2 Elite barbell has a medium sharp knurling feel that won't shred the skin of your legs and neck and a center knurl together with WL markings. The grip is 28 mm and the bar is 220 cm long with a weight of 20 kg - perfect for professionel gyms. The bar is made og the highest quality steel with a tensile strength of 216,000 PSI, which means that it takes 216,000 pounds per square inch of pressure to break the bar. In other words - these bars don't bend. The TR2 Elite WL barbell has a great "whip" with good flexibility while still being stiff enough for all sorts of training with barbells. It is ideal for weight lifting and functional training. The bar is fitted with copper bushing that are gel lubricated and maintenance. The bars can be stored in both a horisontal and vertical stand without the lubrication runs out of the sleeves. All the barbells in our TR2 and TR3 series has been tested in a hydraulic machine with a pressure of 1,500 lb after which the bar must return to a straight condition with a maximum deviation of 0.3 mm. The TR2 and TR3 series bar won't bend og break unless they are severely abused. The bars also come in a female version with 25 mm grip and 15 kg weight. Learn More
    €471.83

  • Crimson Cerakote Bar - 20 kg

    Super solid bar protected with the patented Cerakote ceramic treatment in the color "Crimson Red" (™) treatment in the color "Crimson Red" and with black collars for 50 mm weight plates and bumper plates. The 20kg bar is made of the best 28mm steel with a breaking strength of 216,000 PSI and with oiled lubricated closed bearings that need no maintained. In addition, the bar grip is protected with the very tough Cerakote treatment, which is also used in the weapons industry. The Cerakote treatment has proven to be extremely durable against rust, making the bar suitable for crossfit environments and outdoor training. The red color combined with the black collars gives the bar a different look than standard chrome bars The Crimson Cerakote bar is with medium knurling, double markings and no center knurl - perfect for pressure drills and crossfit workouts. Note: Cerakote barbells are produced for delivery in optional colors. Minimum order is 10 pieces See the range of color combinations here Learn More
    €607.50

  • Ridgeway Cerakote Bar - 20 kg

    Ceramic patented Cerakote treatment of the bar makes it far more resistant to rust. Cerakote has been used for many years in the arms industry as a surface treatment. It is a thin and effective treatment. The barbell is made of strong 216,000 PSI spring steel which gives a good whip and with the matte Cerakote treatment you get a good grip on the bar and lime is not necessary. If lime is used, the lime will better adhere to the bar. Ideal for crossfit environments. The Cerakote weights are designed for tough workouts without breaking. The barbell is without center knurl, 28 mm bar in diameter and 50 mm chromed collars. There are both PL and WL ring markings as well as the groove ring in the rod is medium deep so it fits most people without the hands tearing to blood. NB: Cerakote bars are produced for delivery in optional colors. Minimum order is 10 pcs. See the range of color combinations here Learn More
  • Sniper Cerakote Bar - 20 kg

    Dark gray bar in Cerakote color "Sniper Gray", which is an extra hardy ceramic treatment of the bar, making it extra resistant to rust in humid environments. Cerekote treated bars have a matte surface that provides a good grip on the bar and is available in a myriad of color combinations. Compared to ordinary chrome bars, the Cerakote levers provide a longer service life due to the high resistance - however, they will scratch over time like all other materials when one train with rings and similar iron to iron. The barbell is made of strong steel of 216,000 PSI and a maximum load of 750 kg before bending. The bar itself is 28 mm with both PL and WL markings and the requirements are for 50 mm weight discs. The bearings in the rod are grease lubricated, unlike regular oil lubricated barbs, so these do not require maintenance and can be stored both horizontally and vertically without losing their lubrication. NB:Cerakote barbells are manufactured for delivery in optional colors. Minimum order is 10 pcs. See the range of color combinations here Learn More
  • Safety Squat Bar - 50 mm

    The barbell is designed for front squats and squats where you can control the upper body when bending the knees. The safety squat bar has 2 handles andcan be used in normal gym where you can hang 50mm weight plates on it, which is the standard in all gyms. Solid barbell for deep squats, where you can do squats focusing on the weak points no matter how mobile you are, as your body is in the correct position while squatting Note that the bar is only weighing 9 kg Learn More

    Regular Price: €236.25

    Special price €168.75

  • Trithon Power Bar

    20 kg barbell in chrome with powerlifting knurl markings and bushing bearings for all kinds of weight training that uses 50 mm Olympic weight plates. The barbell has a is 29 mm diameter grip and is made of top quality steel with 216,000 PSI tensile strength and a maximum load of 750 kg . Learn More
    €539.33

  • Trithon Mark II Power Bar - 29 mm

    Trithon Power Bar Mark II is a 29mm modern dual knurl hybrid men's barbell with a breaking strength of 230,000 PSI and 900kg which can be used whether you are doing bench press or squats. This is the barbell for those who want a solid training bar that does not break. The barbell weighs 20 kg with 220 cm length and can handle up to 900 kg without being permanently bent. Perfect for those who want a good barbell that lasts for many years. The barbell has 2 markings placed on the bar, so you can place your hands according to the lift you want to make. The barbell has 50 mm collars for standard Olympic weight plates, and has a diameter of 29 cm in the grip, providing a sturdy bar that is sufficiently rigid for your strength lifting while being made of spring steel for good whip and bounce. The knurling on the Mark II Powerbar is medium without scratching the hands and with a combination of both simple bushing bearings and oil-lubricated needle bearings, the collars on the bar rotate in a smooth balance without spinning too fast but at the same time fast enough to not use force in the wrists to rotate the rod in your snatch. The bar is coated with hardened chrome for a good protection against rust and wear. Learn More
    €539.33

  • Trithon Technique vægtstang - 10 kg

    Kvalitets vægtstang til teknisk træning med de korrekte olympiske mål. Vægtstangen er en god begynder stang til indlæring af olympisk vægtløfning med sine 25 mm diameter greb og kraver, der passer med standard olympiske vægtskiver. Teknik stangen vejer 10 kg og har dual-mark markeringer for på styrkeløft (PL) og vægtløftning (WL) samt de korrekte 131 cm mellem kraverne, så man kan træne teknikken med kun 10 kg på stangen indtil man er klar til at bruge en 20 kgs stang. Knurlingen på stangen går hele vejen ud til kraverne, så man kan holde fast selv ved de brede greb. Trithon Technique stangen kan klare en maks belastning på 180 kg. Vægtstangen har vedligeholdelsesfri glidelejer, der er gel smurte og således ikke lækker olie ved lodret opbevaring. Learn More
    €215.33

  • TR2 Hi Rep Bar - 20 kg

    Quality barbell with double knurl markings (weightlifting and powerlifting) and no center knurl which can tear the neck to pieces in the many clean and jerks in high repetition workout. The bar is perfect for both those who exercise functional training and for general strength training. The Hi-Rep barbell weighs 20 kg with 28,5 mm grip. The bar can also be made in a female version that weighs 15 kg and with 25 mm shaft. The black coating provides a medium knurling for optimal grip that is sharp enough to hold chalk and not so sharp it will tear the skin of your hands. Learn More
    €444.83

    Out of stock

  • vaegtstaenger

    Great bearing barbell for olympic lifts with center knurl and WL markings. The barbell is made of the best steel with a 216.000 PSI tensile strength and 206.000 yield strength, meaning that these bars don't bend or break with a load of up to 750 kg on the bar. The TR2 and TR3 series barbells are tested in a bending machine with a 1500 lb preassure on the middle of the bar and then released again with a maximum deviation of 0,3 mm. These bars will return to dead straight after each lift. The TR3 Competition bar is guaranteed to weigh within +/1 % of the total 20 kg with means you will train with the same weight as in your competition. This bar is however not calibrated by IWF (International Weightlifting Federation) and cannot be used in IWF contests even though its guaranteed to be within the +/- 1% of the weight toleration. The TR3 Competition bar can also be ordered in a female version, weighing 15 kg and with 25 mm grip. Learn More
    €674.33

  • Barbell set 127,5 kg

    Complete barbell set for your garage gym. The set contains of weight plates from 1.25 to 20 kg. The barbells fit 50 mm olympic bars and a barbell and spring locks to hold the plates in place are included. The weight plates are made of synthetic rubber with 3 holes, so they are easy to grip. Learn More

    From: €742.50

    To: €796.50

    View Details

  • Complete bumper plate barbell set

    Save money and buy a complete set of bumper weight plates including one standard 50 mm barbell that withstands drops. The barbell set can be used in centers, garagegyms, associations and the like. I tvivl om valg af vægtstang? Læs vores guide her With this set you get 2 pcs of each bumper plate from 5 kg up to 20 kg, giving a total total weight of 120 kg including the bar. It is a good bar set for most people - and it withstands drops. It is of course possible to buy several bumper plates if you want this as well, if you want other barbells. Learn More
  • Farvet vægtstangssæt - 170 kg

    Komplet vægtløftningssæt med farvede bumperplate vægtskiver fra 5 til 20 kg samt en vægtstang, der kan holde til at blive kastet med. Sættet er med top kvalitets vægtskiver der kan klare at blive smidt efter endt løft, hvor man tager vægtstangen fra jorden og op over hovedet i i snatch, cleans, stem og lignende løft. Vægtskiverne er i kvalitets hård gummi der lugter mindre end de traditionelle sorte bumperplates. Hver vægtskive er farvet i den internationale IWF (International Weightlifting Federation) farve, så man nemt kan se, hvilke skiver man har på vægtstangen. Sættet kommer standard med en WL vægtstang, men såfremt man ønsker en kraftigere og stivere PL stang (29 mm) kan sættet opgraderes til vores Power Bar eller også vores cerakote behandlet røde vægtstang med sorte kraver for en top kvalitets vægtstang i IWF præcise mål. Learn More

    As low as: €1,012.50

    View Details

  • Bumperplates

    Bumperplates weight plates are designed to be thrown to the ground after lifting, without cracking or damage. All bumper plates weight plates have the same outer diameter in the IWF spec of 450 mm and with a 50,4 mm hole diameter, making these plates ideal for 50 mm olympic bars. Bumerplates are made specifically for the functional training, where they can be dropped from overhead presses without being destroyed. Due to the thickness of the 5 kg bumper plates, these however are not intended to be dropped when they are the only plates on the barbell, as they might be damaged. Priced individually Learn More

    Starting at: €33.61

    View Details

  • Colored bumper plate weight plates

    The colored bumperplate weight plates come in the following options:
    5 kg (gray) - 24 mm thick
    10 kg (green) - 43 mm thick
    15 kg (yellow) - 62 mm thick
    20 kg (blue) - 74 mm thick
    25 kg (red) - 84 mm thick

    Our colored weight plates are made of stainless steel and the plates are drop tested to 20,000 drops without breacking. These are high quality bumperplates can be used in professional workout environments, weightlifting clubs, crossfit centers and similar places where they are used for commercial use. The colored bumperplates are weight plates for dead lift, squats and similar strength training, where you need high quality weight plates that fits all standard 50 mm olympic barbells. The weight plates are available from 5 to 25 kg and are sold individually. It is possible to combine the weight plates with 5 kg bumperplates or smaller fraction weight plates from 0.5 to 2.5 kg so you can workout with the intervals you want. The colored bumperplates are tested to handle a minimum of 20,000 drops from head and down to the weight lifting platform and all the weight plates are easily recognized by the international IWF colors from green (10 kg), yellow (15 kg), blue (20 kg) and red ( 25 kg) so it is easy to change the plates to see how much weight is on the rod. Note: Sold individually Learn More

    Starting at: €46.58

    View Details

  • Hi Rep bumper vægtskiver

    Trithon Sport bumperplate vægtskiver i hi-temp materiale specielt udviklet til træning, hvor vægtskiverne kan tåle at smides på jorden efter endt løft. Hi Rep bumpers er lavet af vulkaniseret gummi med rustfri nav i god kvaliet. Navet ligger helt plan med vægtskiven, så den ikke ridser gulvet når den lægges. Det vulkaniserede gummi giver en blød lyd, der larmer mindre end almindelige bumperplates samtidig, med at de skåner underlaget når de droppes fra over hovedhøjde. Hi Rep bumperplates er droptestet 15.000 gange uden at gå i stykker og er forsynet med solide rustfri nav. Det anbefales ikke at smide stangen hvis der kun er 5 kg HiRep bumperplates på, idet disse er meget tynde og vil bukke permanent med tiden, hvis de smides alene. Prisen er pr. stk. Learn More

    Starting at: €47.25

    Out of stock

  • Trithon Competition vægtskiver

    Vægtløfter competition vægtskiver i gummi med store nav til olympiske vægtstænger og udført i hårdt naturligt gummi. Vægtskiverne er beregnet til vægtløftning og træning, hvor de kan smides på jorden efter endt løft. Vægtskiverne har an SHA værdi på 85-90 er testet til at kunne klare minimum 20.000 drops. Trithon Competition vægtskiverne er kalibreret nøjagtig i vægten med en fejlmargin på højest 10 gram og er med deres store nav og tynde mål perfekt til tung styrkeløft, hvor man kan have mange vægtskiver på stangen, da de blot er 33-63 mm brede, alt efter størrelsen. Vægtskiverne passer alle standard olympiske vægtstænger med 50 mm kraver. Hver vægtskive overholder IWF retningslinjerne med de rigtige farver i grøn, gul, blå og rød og er 450 mm i diameter. Prisen er pr. stk. Learn More

    Starting at: €134.33

    Out of stock

  • Vægtløfter platform 2,5x2 meter

    WL vægtløfterplatform med måtter til at dæmpe faldet fra vægtskiverne samt solid laminat plade, hvor man kan stå, når der skal trænes de olympiske løft. Vægtløfter platformen er på 2,5 x 2 meter med pulverlakeret stål ramme og 30 mm gummigulv måtter samt solid træplade til at stå på i midten. Fordelen med træpladen er at man får en solid og fast plade at sætte af fra, hvilket giver et bedre løft. Den kompakte størrelse gør vægtløfterplatformen god til både centre og garagegyms med trang plads, og platformen er god til træning af løft hvor man ønsker at beskytte sine vægtskiver og samtidig dæmpe støjen, når vægtstangen droppes. Learn More
    €1,214.33

    Out of stock

  • EZ Curl bar Olympic

    EZ Curl barbell for use in arm curls. The angles on the bar makes it easier for the wrists, when doing curls. Learn More
    €120.83

    Out of stock

  • Vertikal barbell storage rack

    Solid one-piece design barbel storage. The barbell rack comes fully assembled in one complete unit without joints - making it very sturdy as a storage for your barbells. Keep track of the barbells so they are not all over the gym, with of this sturdy rack. The barbell storage accommodates 8 Olympic weight bars with 50mm collars. The storage rack can also be used for special barbells, triceps bars hex bars and the like. Learn More
    €134.33

    Out of stock

  • Pro barbell and weight plate holder

    Olympic barbell holder for weight plates with 50 mm hole. The holder has a total of 6 arms to hang the weight discs on. The 5 arms are horizontal and intended for weight discs, and a vertical arm also for weight plates or spring locks. The holder is also provided with 4 tubes, for storing 50 mm Olympic barbells and is of high quality for use in the fitnesscenter. The holder is provided with rubber feet to protect the floor from any scratches. Free shipping Learn More
    €471.83

    Out of stock

  • Faste vægtstangssæt i gummi 5 - 25 kg m/stativ

    Faste vægtstangssæt i gummi 5 - 25 kg m/stativ. De faste vægtstænger er nemme at bruge i forbindelse med curls og lignende træningsformer. Spar tid ved ikke at skulle justere dine vægtstænger med skiver og låse, men blot tage den vægtstang i den vægt du ønsker. Vægtstangssættet består af 10 faste vægtstænger fra 5 til 25 kg. Learn More
    €1,957.50

  • Triceps barbell - 50 mm

    Perfect triceps bar with grips that provide a good training of arms .Use the ttriceps bar when lying on a bench and doing pullovers , skull crushers and the like The bar has a grooved grip so your fingers do not slip when you sweat and the triceps bar uses standard 50 mm weight plates, like those used in most gyms . The bar weighs in itself about 10 kg Learn More
    €114.75

  • Hex trap bar - 140 cm

    Lav de perfekte dødløft nemt og sikkert. Vægtstangen er designet som en hex trap bar, hvor man står inde i selve stangen og løfte lige op og ned, uden at behøve at gå så dybt, at man risikerer skader. Ved at stå inde i stangen kan man løfte lige op og ned i dødløften og forhindre forkert tryk på rygsøjlen, for dem der kan have svært ved at få korrekt teknik i dødløften, eller for dem der laver mange gentagelser og risikere at blive træt i lænden undervejs. Vægtstangen vejer ca 20 kg og kan bruges til alle 50 mm vægtskiver. Hex baren er 140 cm lang og kan klare maks belastning på 350 kg, som burde være rigeligt til de fleste. K Der medfølger 2 stk chromelåse til stangen Learn More

    Regular Price: €201.83

    Special price €168.75

  • Straight curl barbell - 150 cm

    Olympic curl bar for 50 mm weight plates. The bar is perfect for biceps curl exercise and other arm workout where you want a smaller length straight barbell. The bar can handle 250 kg without bending and is 150 cm long. The barbell is made of chrome-plated steel with nice knurling grip, so you can hold on tight while training. Learn More
    €120.83

    Out of stock

  • Hex trap bar with folding handles

    Special barbell for deadlift , farmer walks and strength training. The trap bar is a shaped hexadiagonal bar with oblique angles , so you can stand inside the barbell and lift straight up and down in the deadlift , without having to make an incorrect lift in the back. The hex bar - also called a trap bar - has folding handles and is designed for standard weight plates with 50 mm holes that are also used in gyms and weight lifting clubs. The trap bar is 156 cm long and can handle a maximum load of 250 kg . Learn More
    €215.33

    Out of stock

  • Trithon power locks - 2,5 kg

    50 mm competition locking collars to be put on the Olympic barbells. Each lock weighs 2.5 kg and effectively locks the discs to the bar so they do not fall off during lifting. The locks are designed for the serious lifters and have a tolerance in the weight of 0.01%. 2 pieces in each set Learn More
    €107.33

  • Weight plate and bar holder

    Olympic weight plate holder for weight plates with a 50 mm hole. The holder has a total of 6 arms for hanging the weight plates as well as 2 tubes for storing 50 mm olympic barbs, and is of solid quality for use in the fitnesscenter. The holders are positioned at 40 cm spacing at the bottom and 30 cm spacing at the top so that there is room for large weight plates and bumper plates at the bottom holders, and the smaller 1.25 - 5 kg weight plates on the top holders. Learn More

    Regular Price: €228.83

    Special price €168.75

  • Barbell wall gun rack - 6 pcs

    Place the gun rack bar holder on the wall and keep track of the barbells. With these barbell racks there is space for storage of 6 barbells. The barbells are stored horizontally, which ensures the longest possible life for the barbells, thereby ensuring that any oil from the bearings in the barbells does not run out when mounted on the wall. Due to the horizontal storage, these barbell storage racks are also called "Gun Racks" according to the way rifles are stored. The barbell racks consists of 2 sections of iron mounted on the wall. Learn More
    €120.83

  • Lige curl vægtstang - 120 cm

    Lige Curl vægtstang på 120 cm til brug i fitnesscentre og lignende steder. Vægtstangen er grundet sin korte længde velegnet til brug ved træning af arme, enten som biceps træning eller triceps træning. Selve afstanden imellem kraverne er 82 cm og stangen har 28 mm greb og er god til biceps træning. Selve stangen vejer 8.5 kg og endestykkerne er 17 cm lange til at loade vægtskiver på Learn More
    €134.33

  • Vægtstangsholder - 10 stk

    Hold styr på vægtstængern i træningscenteret og sæt dem op på væggen i de populære "gun rack". Med disse holdere er der plads til opbevaring af 10 stk vægtstænger. Vægtstængerne bliver opbevaret vandret, hvilket sikrer længst mulig levetid for vægtstængerne, ider man derved sikrer at eventuel olie fra lejerne i vægtstængerne ikke løber ud, når disse monteres op ad væggen eller i andre vægtstangsholdere, hvor de står lodret. Vægtstangsholderne består af 2 stk profiler i jern, der monteres på væggen. Fri fragt Learn More
    €168.75

  • Black Lock Jaw Collar - 2 pcs

    Lock Jaw lock clamps replace traditional spring clamps. Perfect for exercise where you drop the barbell from head height to the ground. With these Lock Jaw clamps, you ensure that your weight discs do not get lost when you drop the barbell with weight discs for snatches and similar exercises. Learn More
    €26.33

  • Neck pillow for barbell

    Neck pillow for the bar with good protection of the neck and shoulders. The neck pad is easily mounted to the barbell with the smart velcro lock and is perfect for squat and similar exercises with barbell. Learn More
    €26.33

  • Bodypump kit

    Complete bodybump set with barbell and weights for fitness training so you can train the whole body. Perfect for team training and light strength training in gyms and associations. The kit consists of a 140 cm bar and associated weight plates of 2x5 kg, 2x2.5 kg and 2x1.25 kg. Learn More

    As low as: €202.50

    View Details

43 Item(s)

per page

Barbells
Minimal Price: 156.00